- Brand: BAUMIT
- Product Code: MosaikTop
- Delivery time: 5-10 Days
- Colour: Please see product description
- Coverage: approx. 4.54m2
- Weight: 25kg
- Ex Tax: £52.12
Product: Ready to use, topcoat render with variegated aggregate for exterior and interior use on to mineral substrates, primarily used in the plinth area.
Intended use: A topcoat render application onto concrete, mineral basecoats, intermediary coats and EWI reinforcement coats. Suitable for use internal, external and plinth areas.
Composition: Organic binder (artificial resin), coloured quartz sand, water and additives.
Properties: Coloured, solvent free, artificial resin based and easy to use. Baumit MosaikTop is hydrophobic, resistant to weathering, frost, impacts, abrasions and washable.
Aggregates size: 2.0mm
Colours: 36 colours available (see photos above) - please state chosen colour (number in the right hand corner of the sample) in comments box at checkout.
Application and structuring of MosaikTop: Apply MosaikTop with a stainless steel trowel to grain size level and skim off immediately, with no gaps and always in the same direction.
Prior to application, stir thoroughly with a slow-moving agitator.
Substrate: Substrates must be sound, clean, dry, free from dust and dirt. Basecoat renders should be smooth floated and fully cured. Gypsum plasters, gypsum plasterboards and stained dirty background to be treated with Baumit SperrGrund. The areas to receive Baumit MosaikTop must first be primed with Baumit UniPrimer or Baumit DG 27 in one or applications to achieve uniformity of colour and equalized background suction. Suitable colours can be taken from the table below. Let the primer dry for at least 24 hours.
Mixing: Baumit MosaikTop is ready to use. A maximum of 1 % dilution with clean water is permitted. Mix through slowly with an electric hand mixer. Mix together products which have different batch numbers to eliminate irregular colour tones.
Application: Baumit MosaikTop is applied onto the basecoat with a stainless steel trowel to the aggregate thickness and repeatedly smoothed out flat always in direction only. Complete full sections in one application.
Further information: on the air, material and background temperature must be above +5° C during application and curing. Protect the finished work from direct sunlight, rain, frost and strong winds (e.g. with scaffold nets). Clean tools and equipment thoroughly with water immediately after use.
The milky appearance of the applied Baumit MosaikTop will disappear after drying. High air humidity and low temperatures can prolong drying times considerably. High moisture penetration can cause the Baumit MosaikTop to become milky in appearance at a later date. Ensure dampness cannot ingress into the substrate. Baumit MosaikTop must not be applied to horizontal areas (floors, wall capping detail) Protect other materials such as glass, ceramics or metal etc from contamination with appropriate coverings.
|Colour||Please see product description|