BAUMIT EdelPutz MINERAL RENDER 1.5mm - pre-coloured 25kg
- Brand: BAUMIT
- Product Code: EdelPutz Spezial pre-coloured Delivery: 5-10 Days
- Ex Vat: £21.56
Please note, minimum quantity for this product is 24 bags
Product: Waterproof, permeable thin-layer mineral render. Product is characterized by good resistance to atmospheric effects; it is suitable for outdoor and indoor use, for hand or machine application. This render is suitable as a finishing surface in External Thermal Insulation Systems.
Mineral based render for float and scratch textures. Baumit EdelPutz is suitable for direct application (without a filler coat) on to all thermally insulating basecoat renders (e.g. ThermoPutz, ThermoExtra) and on to lime-cement renders (e.g. SpeedPutz L, GrundPutz Leicht, MPA 35, GrobPutz 4 mm) and on to all renovation renders.
Grain size: 1.5mm, 2.0mm, 3.0mm - please state your choice in comments section when placing an order.
Colour: please choose a colour from the pallete below and state your choice in comments section when placing an order.
Composition: White cement, building lime, sand, lime, admixture.
1.5 mm - about 2.5kg / m²
2.0 mm - about 3.0kg / m²
3.0 mm - about 4.3kg / m²
Water consumption: about 8 l water/25 kg bag
Storage: Store in a dry place, on pallets - 6 months.
Substrate: The substrate must meet the standard requirements: to be tacky, smooth, ripe and equally absorptive without cracks. The substrate must be free of dust, oily stains and salt spots.
Special stucco Baumit EdelPutz Spezial is not suitable for: plastics, the layer or layers of oil paint, the adhesive coating or other coatings dispersion.
Surface preparation: The earliest 24 hours before applying mineral plaster Baumit EdelPutz Spezial should be applied to the substrate Baumit UniPrimer universal primer to compensate substrate.
Treatment Mixing: The contents of the bag (25 kg), thoroughly mixed with about 8 liters of water. The mixing time 3 - 5 minutes (no more). The required consistency of the material must be adjusted by adding any water.
Machine application: Before starting work, it is necessary to fill the generator of the mixing zone and the snake with lime milk to increase the slip of the material.
The structure of layers: Render should be applied with stainless steel float.
Grooved structure: After a brief dry use plastic float circularly, vertically or horizontally.
Brushed structure: Immediately after stretching, rub with the plastic float doing circular movements.
Tips: During the treatment the binding material (min. within 12 hours of application) and substrate’s temperature must not fall below +5 ° C.
When processing of the material it is recommended to secure the facade in the right way from the effects of direct sunlight, rain and strong wind.
|Baumit_EdelPut z Spezial_data _sheet.pdf File Size 89.16KB Downloaded: 130|