BAUMIT StyleTop Thin coat textured render with intense colour - 25kg
- Brand: BAUMIT
- Product Code: StyleTop Delivery: 5-10 Days
- Ex Vat: £84.27
Description: Decor plaster with intense colour for the decorative design of exterior façades.
Ready-to-use, pasty, organic thin-layer final coat with rubbed or grooved structure for interior and outdoor use. Baumit StyleTop can be applied manually and by machine.
Grain size: 1.5mm, 2.0mm, 3.0mm - please state your choice in comments when placing an order.
Colour: please click here to chose colour and state your choice in comments when placing an order.
Prodcut: Ready to use, wet topcoat render for thin coat application. Silicone based and stain retarding decorative finish with scratched grain texture for internal and external areas. Suitable for hand or machine application. A system component of the Baumit External Wall Insulation Systems open,EPS, XPS, XS 022, and Mineral.
Composition: Organic binders, mineral fillers, silicate fillers, colour pigments, additives and water.
Properties: Weather resistant, hydrophobic, water vapour permeable, washable, brilliant colour, robust and easy to use.
Intended use: A topcoat render application providing decoration and protection to facades. For application over old and new mineral coatings, concrete surfaces, and mineral and organic basecoats.
Coverage: 1.5mm - 2.5kg/m2; 2.0mm - 3.2kg/m2; 3.0mm - 4.2kg/m2;
Substrate: Substrates must be sound, clean, dry, free from frost, dust efflorescence and not water repellent. Existing mineral based coatings and paints must be sound and well bonded to the substrate (confirm with pull off tests and/or cross cut tests acc. to Baumit guidelines).
• Basecoats on External Wall Insulation systems,(see above)
• Lime and cement renders, concrete
• Well bonded mineral, silicate and dispersion paints and coatings
• Organic basecoats (e.g. SilverFlex)
• Gypsum plasterboards (pretreated with 2 coats of primer)
• Gypsum plasters
Surfaces (excluding Baumit SilverFlex basecoats) must always be prepared with a full and even coat of Baumit UniPrimer before applying StyleTop! Allow to dry for 24 hours. Refer to Product Data Sheet.
Mixing: Baumit StyleTop must be well and slowly mixed with an electric hand mixer before application. It may not be mixed with other paint materials. Where required a minimal amount of water (max. 1%) may be added to improve workability.
Application: The StyleTop is applied with a stainless steel trowel or a fine spray machine and trowelled through to the grain thickness to produce a full and even coat. The surface is then textured using a plastic float, moving in tight circular motions.
|baumit_StyleTo p_data_sheet.pdf File Size 117.49KB Downloaded: 163|
|Colour||Baumit Life colour palette|
|Coverage||Please see product description|