BAUMIT MP69 Lightweight base coat / render - 30kg
- Brand: BAUMIT
- Product Code: MP 69 Delivery: 5-10 Days
- Ex Vat: £12.49
Product: Baumit MP69 is a light weight, pale grey, vapour permeable (breathable), lime based render used as a base coat on to light weight backgrounds (λ ≥ 0.11 W/mK) such as light weight block or Porotherm block. It can also be used as a base coat on to normal dense masonry and can be reinforced with a layer of MC55 and StarTex mesh.
- as a base coat render for lightweight block and Porotherm.
- as a base coat render for normal dense masonry.
- for use under Baumit decorative topcoats.
- top coat render for interior and exterior.
Application: Baumit MP69 should be mixed by a plaster whisk with clean tap water to a smooth consistency and then applied by hand or it can be spray applied by machine. Externally it needs to be applied at a minimum thickness of 18mm in one pass and at a maximum of 20mm per coat. It can also be used internally where it is applied at a typical thickness of 10mm. MP69 can then be applied as a top coat as 3mm if required or other finishes from the Baumit range can be applied.
Coverage: Each 30kg bag of Baumit MP69 will cover up to 3m2 at 10mm or 1.6m2 at 18mm. As with all lime based materials, it should only be used when temperatures are above 5 degrees Celsius and away from strong, drying winds and direct sunlight. This product will cure at a rate of 1mm per day in optimum conditions.
|Baumit_MP69_Da ta_sheet.pdf File Size 200.2KB Downloaded: 126|
|Coverage||up to 3m2 at 10mm or 1.6m2 at 18mm|