Mon - Fri: 0800 - 1600

  • CEKOL C-35 White smooth cement based external plaster - 20kg

CEKOL C-35 White smooth cement based external plaster - 20kg

  • Brand: CEKOL
  • Product Code: C-35
  • Delivery: 2-3 Days
  • £26.58

  • Ex Vat: £22.15

Description: Cekol C-35 is a high quality material used for smoothing and refining of external walls (façades) of buildings, but it can also be used internally, particularly in rooms exposed to high humidity (e.g. bathrooms, saunas, refrigerated chambers).

Properties: Elastic, frost and water proof plaster. It is a dry mixture of high quality white cement, white mineral fillers and modified substances which guarantee excellent workability and adhesion to mineral bases (e.g. concrete, bricks).  Cekol C-35 does not contain toxic substances or components which turn yellow when exposed to atmospheric conditions. It is an excellent primer for emulsion, acrylic, gloss and mineral paints, where its white colour provides better coverage for paint so to help achieve a full colour effect. Cekol C-35 is recommended as a top layer of thermal insulation systems.

Substrate: The plaster has an excellent adhesion to concrete, bricks, ceramist blocks, plasterboards and blocks. The surface being adhered to must be flat, dry, clean and free from dust, grease and paint prior to plastering to ensure a good bond.

Note: Strongly absorbable bases should be primed with priming emulsion.

Application: Pour the package contents to water in the proportion of 0.35 litre of water for 1 kg of dry powder and mix thoroughly until a uniform thick mixture is obtained. Then wait 3 minutes and mix thoroughly again. Apply the plaster to previously prepared surface with clean stainless steel or plastic tools. After preliminary setting of the material, small finishing corrections of the surface are possible. It is recommended to apply layers not thicker than 5 mm at a time. Painting is possible after plaster is fully set. In order to reduce paint wastages, set Cekol C-35 surface should be primed. Layer of fresh plaster should be protected against excessive drying.

- Mixture proportions: 0.35 l of water for 1 kg of dry powder

- Pot life: 3 to 4 hours, depending on temperature

- Coverage:1.5 kg/m2 for 1 mm thick layer

- Layer thickness: 1 to 5 mm

- Work temperature: +5oC to +25oC

- Compression strength after 28 days: ≥ 4 MPa

- Water absorption: c ≤ 0,40 kg/m2▪min0,5

Packing: Paper bags with PE lining - 5; 20 kg

Storage: Store in original packages, in a dry compartment. Shelf life up to 12 months.

Thumb File information
Cekol_c_35_data_sheet.pdf 269.95KB 152
Sizing
Colour white
Coverage 1.5 kg/m2 for 1mm
Weight 20kg

Write a review

Please login or register to review

Related Products

BAUMIT MP69 Lightweight base coat / render - 30kg

BAUMIT MP69 Lightweight base coat / render - 30kg

Product: Baumit MP69 is a light weight, pale grey, vapour permeable (breathable), lime based rende..

£14.99 Ex Vat: £12.49