Mon - Fri: 0800 - 1600

  • BAUMIT DP 85 / DP85 Thermal insulating render 9kg

BAUMIT DP 85 / DP85 Thermal insulating render 9kg

  • Brand: BAUMIT
  • Product Code: DP 85
  • Delivery: 5-10 Days
  • £21.90

  • Ex Vat: £18.25

Description: Insulating internal and external areas of masonry walling. Prevention of mould growth on internal walls. Insulating old buildings where vapour permeability is important. Baumit DP85 is a breathable, insulating, lightweight, backing coat render which is grey in colour and uses an EPS aggregate to provide it’s high level of insulation. It can be used internally of externally and is ideal for use in old buildings where vapour permeability is important.

Application: Surfaces should be clean, dry and free of dust and salts. In old buildings with salts present (efflorescence) a splatter coat of SV61 should be applied first to prevent salts passing through the new plaster layers. Baumit DP85 should be mixed with clean tap water and mixed with a plaster whisk to a smooth creamy, lump free consistency and applied by hand or by projection plastering machine. This should be applied at a minimum of 30mm or up to 50mm in one coat.

Further coats of Baumit DP85 can be applied to bring the maximum thickness up to 100mm. Each coat should be flattened off and the surface textured with a nail or grid float. Allow 1-2 days between coats.

After curing a 5mm coat of Baumit MC55 with Baumit StarTex mesh should be applied before any finish coats.

Coverage: Each 9kg bag of Baumit DP85 will cover up to 1m2 at 50mm thickness. As with all lime based materials, it should only be used when temperatures are above 5 degrees Celsius and away from strong, drying winds and direct sunlight. This product will cure at a rate of 5mm per day in optimum conditions after which further coatings/finishes can be applied.

Thumb File information
Baumit_DammPut z_DP_85_data_s heet.pdf 128.17KB 205
Coverage up to 1m2 @ 50mm thickness per bag
Weight 9kg

Write a review

Please login or register to review